laser rust removal machine maintenance

The maintenance of the laser derusting machine is the key to ensure its long-term stable work and prolong its service life. The following are some common laser rust removal machine maintenance methods:
1. Regular cleaning: Regularly clean the inside and outside of the derusting machine to remove dust, grease and other impurities to avoid damage to laser devices and electronic components.
2. Check the optical system: Check whether the optical attenuation sheet, lens, lens and other optical components are clean, whether there is wear, crack, etc., and replace or repair in time.
3. Check the cooling system: Check whether the water pumps, water tanks, and water pipes of the cooling system are operating normally, and whether the water temperature is normal. If there is any abnormality, it should be dealt with in time.
4. Check the electrical system: Check whether the electrical components such as power lines, switches, contactors, and relays are normal, and replace or repair them in time if there is any abnormality.
5. Regular calibration: Regularly calibrate the power, wavelength and other parameters of the laser to ensure that its output is stable and meets the requirements.
6. Pay attention to protection: pay attention to the safety protection of laser radiation during use, prevent personnel from being directly exposed to laser radiation, and avoid harm to personnel and equipment.