1. First of all, the laser marking machine should not be placed in a place with high humidity, dust or steam flow. Possible hazards: fire or electric shock.
2. When moving the laser marking machine, please remove the power cord and other cables. Potential Hazards: Causes equipment damage, fire, personal injury or electric shock.
3. Do not let the power cord of the laser marking machine close to the heater. Otherwise, it will also cause fire or electric shock, and the laser marking machine is fine and maintenance-free.
4. Be sure to turn off the power before disconnecting the power cord and other cables of the marking machine equipment. Failure to do so will result in equipment damage.
5. Do not place the laser marking machine at high temperature, especially expose the marking machine to direct sunlight or near heaters. Failure to do so could result in fire or deterioration of parts or equipment surfaces.
6. When handling and maintaining the laser marking machine equipment, disconnect the power plug from the socket. Avoid electric shock.
7. When disconnecting the power cord, do not hold the cable, but the plug.
8. When the laser marking machine is not used for a long time, please disconnect the power plug to avoid fire.
9. Do not disconnect the power plug with wet hands to avoid electric shock.
10. Do not place any objects on the marking machine equipment.
11. Please turn off the power when cleaning the lens.
12. Do not move the device while placing any object on it.
13. Do not close the ventilation holes to prevent heat dissipation of the machine and equipment.
14. Do not modify the fiber laser marking machine, heat it, apply too much force to bend, twist or stretch, or place heavy objects on the fiber line, which may cause damage to the fiber line, and the fiber optic cable specifies a very small bending radius of 150mm or Larger, bending, squeezing, stretching, and heating fiber optic cables can not only cause failure, but fail to maintain instrument performance.
15. In the process of daily use, it is actually considered to install exhaust and air purifiers according to the exhaust gas and waste generated by the laser processing product materials. Certain materials can produce toxic fumes or particles, and dust in the equipment can cause malfunction or fire.
16. Please turn off the power when cleaning the lens, otherwise it will cause harm to the human body. Do not put your hands on the laser marked area.
