At present, in the field of metal welding, hand-held laser welding machines are used in the field of metal welding. Basically, the metal that can be welded by traditional welding and the laser can be welded, and the welding effect and speed will be better than traditional welding process. Traditional welding is difficult to weld non-ferrous metal materials such as aluminum alloys. Laser welding has a wide range of applications, and aluminum alloys and other materials are easy to weld. In terms of welding metal materials, there are also some points that need to be paid attention to in hand-held laser welding machines.
First, double check that the shutter mirrors are clean, contaminated lenses can burst quickly during use. So far, the adjustment of the laser part has been completed. With the development of laser welding technology, the technology of laser welding machine is becoming more and more mature, and the application of the industry is also growing. However, in the actual welding production process, various problems also occur due to various reasons. Therefore, how to control the occurrence of these problems and how to solve these quality problems has become the most important link in the production and processing process. We analyzed the reasons for the machinable products based on the welding phenomenon. Generally speaking, poor processing effect, two reasons, processing material problems, and laser welding machine collecting and changing materials can effectively solve such problems. The second is the setting of technical parameters, which needs to be continuously tested according to the same part of the welded product, and discussed according to the continuous welding results.
High safety, the touch switch is only effective when the welding tip touches the metal, and the touch switch has temperature sensing.
Welding can be performed from any angle, and irregular shapes of workpieces with various complex welds can be welded. Weld from any angle.
It also keeps the factory clean and tidy working environment. Compared with traditional welding, laser welding has obvious advantages, but laser welding has relatively high requirements on the pre-processing accuracy of the workpiece and tool fixtures. In order to fully utilize the advantages of laser welding, reduce production costs, and improve production efficiency, it is necessary to optimize the entire sheet metal production process, such as product design, laser cutting, stamping, bending, and laser welding. In actual production, we found that the laser welding process is not the main determinant of the cost of sheet metal products using laser welding technology. Actual production experience has proved that 70% of the cost of sheet metal products is determined by product design. In order to reduce production costs and improve welding efficiency, we first need to start with product design. In the initial product design, taking into account the requirements of laser welding on the workpiece, such as reducing the bending process in production, try to use laser cutting boards, self-positioning design, etc.
